You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
140 SCAN SOFTWARE Available Here
- Thread starter Rasmeek
- Start date
will_get_there
Registered Users (C)
Macors Not Enabled
When I try to run it , it says
"To run this macro, Enable the macros for this project"
When I open the macro in VBA and go to VBAProjectProperties, I think I have to enter username and password to get to properties.
How do I fix this problem ?
will_get_there
When I try to run it , it says
"To run this macro, Enable the macros for this project"
When I open the macro in VBA and go to VBAProjectProperties, I think I have to enter username and password to get to properties.
How do I fix this problem ?
will_get_there
GCDisaster
Registered Users (C)
EAC-03-131-5****
Can anyone please run the program for series EAC-03-131-50500 through 50600 and post the result?
I tried several times but did not get any results back. Don't know what went wrong. My online status says the receipt number cannot be found in the system. It's been like that since the beginning. Could this be the reason I don't see any result when I run the macro?
Thanks for the help...
=============
I-140, EB3
RD: 03/20/03
ND: 03/24/03
AD: ??/??/??
Can anyone please run the program for series EAC-03-131-50500 through 50600 and post the result?
I tried several times but did not get any results back. Don't know what went wrong. My online status says the receipt number cannot be found in the system. It's been like that since the beginning. Could this be the reason I don't see any result when I run the macro?
Thanks for the help...
=============
I-140, EB3
RD: 03/20/03
ND: 03/24/03
AD: ??/??/??
For all those having problems running the macro because marcos are disabled
Option 1
Open the file in excel. It will prompt you whether you want to enable macros. Click on enable macros..
Option 2
After you have opened the file, go to Tools..Macros..Security and change the settings.
GCDisaster
I found atleast 2 I140's in your range
EAC0313150506 Received 3/24/2003
EAC0313150534 Received 3/24/2003
Hope you too get the same when you run the scan. As you know from other posts, quite a few applications in your date range are not in the online system.
So they show up as invalid EAC numbers and your IP gets blocked if you check just about 10 invalid applications. Hope that explains...
Rasmeek
Option 1
Open the file in excel. It will prompt you whether you want to enable macros. Click on enable macros..
Option 2
After you have opened the file, go to Tools..Macros..Security and change the settings.
GCDisaster
I found atleast 2 I140's in your range
EAC0313150506 Received 3/24/2003
EAC0313150534 Received 3/24/2003
Hope you too get the same when you run the scan. As you know from other posts, quite a few applications in your date range are not in the online system.
So they show up as invalid EAC numbers and your IP gets blocked if you check just about 10 invalid applications. Hope that explains...
Rasmeek
GCDisaster
Registered Users (C)
Thanks for your help, Rasmeek. I was able to run the script this time and I got only EAC0313150506 returned with the following details:
Status: Received
Date: 03/24/2003
Unfortunately I didn't get my receipt number in the result. I wish I could see the status somehow.
===================
I-140 EB3
RD: 03/20/03
ND: 03/24/03
AD: ??/??/??
Status: Received
Date: 03/24/2003
Unfortunately I didn't get my receipt number in the result. I wish I could see the status somehow.
===================
I-140 EB3
RD: 03/20/03
ND: 03/24/03
AD: ??/??/??
Try directly at
http://www.immigration.com/frame/BCIScasestatonlinefr.html
If you dont get your case status here, scan cannot get it for you as scan opens the same page.
Did see a few post in your date range getting approved in the last 2 weeks. Hope you get your application cleared soon.
Good luck,
Rasmeek
http://www.immigration.com/frame/BCIScasestatonlinefr.html
If you dont get your case status here, scan cannot get it for you as scan opens the same page.
Did see a few post in your date range getting approved in the last 2 weeks. Hope you get your application cleared soon.
Good luck,
Rasmeek
compuser1973
Registered Users (C)
I haven't been able to get the scanning excel software to work - can someone please do the scan for EAC0316451XXX range? I have my I-140 in that range.
Thanks in advance!
Thanks in advance!
AshvinKPatel
Registered Users (C)
Macro is not working
I am using this macro file to see how VSC is doing for 140. But now when I run macro then it execute URL which say page can not found.
will some one fix that issue ? Thanks
I am using this macro file to see how VSC is doing for 140. But now when I run macro then it execute URL which say page can not found.
will some one fix that issue ? Thanks
NYGCSeeker
Registered Users (C)
Scan Request for 04-101 Series
Hi,
I tried to scan for the series 04-101 50000 to 59999
but I did not get back anything. I got a pop up saying that it is "done" but nothing shows up on the spreadsheet.
Can someone who has done this before PLEASE do this range for me.
Regards.
Hi,
I tried to scan for the series 04-101 50000 to 59999
but I did not get back anything. I got a pop up saying that it is "done" but nothing shows up on the spreadsheet.
Can someone who has done this before PLEASE do this range for me.
Regards.
Re: Scan Request for 04-101 Series
BEFORE RUNNING THE SCAN PLEASE REMEMBER THE FOLLOWING . DO NOT SCAN FOR MORE THAN 300.
i see that you ran scan for 9999 Receipt numbers.
That is kind a doing things without thinking ( nothing personal)
because of the following
1. USCIS typically doesn't get that many applications every day.
2. You will be blocked for 24 hours because you exceed the limit.
here is the sample range from 50001 to 50020
EAC Type Status Date Status Group
EAC0410150007 RFE sent 03/17/2004 RFE sent
EAC0410150015 Received 02/24/2004 Received
Try this one . The excel you have had old URL's
Added later
This is not true. I did go back verified the URL's in the old xl. It had correct URL's . so I don't know why you couldn't run it . That's what happens if you don't follow the rules i guess..( at the top in RED)
Originally posted by NYGCSeeker
Hi,
I tried to scan for the series 04-101 50000 to 59999
but I did not get back anything. I got a pop up saying that it is "done" but nothing shows up on the spreadsheet.
Can someone who has done this before PLEASE do this range for me.
Regards.
BEFORE RUNNING THE SCAN PLEASE REMEMBER THE FOLLOWING . DO NOT SCAN FOR MORE THAN 300.
i see that you ran scan for 9999 Receipt numbers.
That is kind a doing things without thinking ( nothing personal)
because of the following
1. USCIS typically doesn't get that many applications every day.
2. You will be blocked for 24 hours because you exceed the limit.
here is the sample range from 50001 to 50020
EAC Type Status Date Status Group
EAC0410150007 RFE sent 03/17/2004 RFE sent
EAC0410150015 Received 02/24/2004 Received
Try this one . The excel you have had old URL's
Added later
This is not true. I did go back verified the URL's in the old xl. It had correct URL's . so I don't know why you couldn't run it . That's what happens if you don't follow the rules i guess..( at the top in RED)
Last edited by a moderator: