Very Smart !

I

IntazarGC

Registered Users (C)
This is what I get after waiting for 2.5 years since I485,

We're sorry, but you have been denied access due to too many inquiries.

The purpose of the Customer Relationship Interface System is to give customers and their representatives access to case status information on their applications in our electronic inventory. To ensure that customers have full access to check on their cases, we use several volume limits.

You received this message because you repeatedly entered invalid receipt numbers.

If you believe the problem may be that you simply repeatedly made mistakes typing in the specific receipt numbers you wish to check, you can close your browser, come right back and try again. If you are blocked when you try again, it is because you either repeated your mistake or because your total volume of inquiries over the past 24 hours has at that point exceeded our overall volume limit, in which case you will be blocked for a period of time.
 
try again in 24 hours, it'll reset.

You only have a limited amount of times that you can enter invalid receipt numbers (about 10 times per day), and you can only enter 1000 valid receipt numbers per day.
 
Proxy

You may be on a Proxy server within your company and someone else could be running that Scanner Macro in your company. Just wait a day and you should be fine.
 
Mr/Ms. IntazarGC

May be somebody using your LIN and run one of the scripts floating around. Whens omeone run a script from lin-02-xxx-xxxxx to lin-03-xxx-xxxxx , every application in-between will be scanned and flagged as viewed. If the program end-up in a loop all will be checked many times and result the message you got.

You have no control on this one please relax and sit tight


Regards
 
Try this way ....

Guys ,


Last week end while running the greenland report on LIN-02-148- I got the same message aafter about 700 number scan ...


This is what I did and it worked all the time except Once... ( I did this 4 times) to scan about 3000 numbers... You can only do this from Home, if your ISP is giving the Dynamic IP address. ...


1. Once you get this message .... stop the script ...

2. Disconnect the Internet connection (I have DSL,with Dynamic IP, so I logged in to my router and disconnected router... AND WAIT fro about 10 minutes ...

3. Connect again....

Try running script again ....

If does not work ...
4. Delete all cookies / and temp internet files...


This time it will work ...
 
or, you could just release the DHCP lease ;)

(for cable modem-ers who dont *disconnect*--what a silly concept...)
 
You must log in or register to reply here.
Top