Help script not working

G

gambler

Registered Users (C)
I ran the script, pressed ctrl Z, entered 02-225 and then entered the range of 1000 numbers. It connects to the bcis website. But nothing happens. Can anybody explain if I am doing anything wrong.
Please point me to the correct script.
 
This is not working

I opened the attached sheet and press contol Z. Nothing happens ?????
 
I have macros enabled

Thanks for your help vidongre.
It connects to the bcis web site and then nothing. Here are the parameters I used
02-225
53500-53999
Can you run this and confirm whats hapenning ?
 
Re: I have macros enabled

Originally posted by gambler
Thanks for your help vidongre.
It connects to the bcis web site and then nothing. Here are the parameters I used
02-225
53500-53999
Can you run this and confirm whats hapenning ?
Click to expand...
Are you able to get the status of any application without using the script?....
 
Gambler

I can run the script. Here are the results

EAC0222553502 Resumed 8/21/2002 Resumed/FP recvd
EAC0222553560 Resumed 8/16/2002 Resumed/FP recvd
EAC0222553570 Resumed 8/21/2002 Resumed/FP recvd
EAC0222553595 Resumed 8/16/2002 Resumed/FP recvd
EAC0222553633 Received 6/24/2002 Received
EAC0222553668 Received 6/24/2002 Received
EAC0222553701 Resumed 8/16/2002 Resumed/FP recvd
EAC0222553712 Received 6/24/2002 Received
EAC0222553721 Resumed 8/16/2002 Resumed/FP recvd
EAC0222553727 Resumed 9/16/2002 Resumed/FP recvd
EAC0222553730 Received 6/24/2002 Received
EAC0222553764 FP recvd 8/28/2002 Resumed/FP recvd
EAC0222553779 Resumed 8/16/2002 Resumed/FP recvd
EAC0222553790 Resumed 8/16/2002 Resumed/FP recvd
EAC0222553896 FP sent 7/18/2002 FP sent
EAC0222553918 Received 6/24/2002 Received
EAC0222553937 FP sent 7/18/2002 FP sent
EAC0222553944 Received 6/24/2002 Received
EAC0222553951 Received 6/24/2002 Received
EAC0222553961 FP recvd 8/28/2002 Resumed/FP recvd
EAC0222553986 Resumed 8/21/2002 Resumed/FP recvd
EAC0222553991 FP sent 7/18/2002 FP sent
 
I have been using the same procedure for quite some time now.

Open the script.xls
Enable Macros
Press Control Z
Enter the data range
Click Yes.
 
gambler

The script works fine for me. You might also want to check your security settings for macros (In Excel, open Tools-->Macrois-->Security. Change security level to 'Low' and see if that works.
 
Still doesnt work

Maybe because I have excel 97. Thanks for all your help.
Can somebody take up this series ??
 
You must log in or register to reply here.
Top